Concrete pool decks in Midland TX - sure footing for wet, bare feet around the pool
Cracked, slick or sunken concrete by your pool? We build and resurface decks with a finish picked for wet, bare feet and the sun.
- Owner writes the estimate I come out myself to measure and write it up.
- Finish chosen for grip We talk through texture for wet, bare feet before pouring.
- Movement checked first On an old deck, we check for shifting before resurfacing.
- Walk-through at the end I walk the finished deck with you once the crew's done.
- Licensed and fully insured.
- Free in-person estimates.
- Expect a reply within 1 business day.
How do you know your pool deck needs work?
Most deck problems start small and get worse with every season of splashing, foot traffic and sun, so it pays to catch them before a crack becomes a trip hazard.
Cracks running across the deck
Cracks that wander across the deck usually mean joints were cut late or placed badly. Left alone, water gets in, edges chip and the cracks keep growing.
Slabs sinking or tipping
A section that has dropped or tilted means the dirt under it settled or washed out. Waiting lets it keep moving and opens a lip someone can trip on.
Water pooling after a swim
Puddles that sit on the deck or run toward the house usually mean the slope is wrong. Standing water gets slick, leaves stains and soaks the ground under the slab.
Slick spots when it's wet
If wet feet slide on the deck, the texture has worn smooth or the sealer built up too glossy. That's a fall waiting to happen, and it won't fix itself.
Too hot to stand on
A deck you can't cross barefoot in the afternoon usually has a dark finish or coating holding heat. A lighter finish or overlay can make the area usable again.
Chipping, flaking or dusty surface
When the top flakes or turns powdery, it was often poured in midday heat or has lost its sealer. Every season of splash and pool chemicals takes more off.
How we build and resurface concrete pool decks
A concrete pool deck in Midland is the slab everybody crosses wet and barefoot, so we think about their feet first and talk through finishes for grip and for how warm they get in the sun. On an old deck, I start by checking whether it's still moving before we talk about resurfacing. On a new one, we dig out and pack the subgrade, the dirt the slab sits on, and set the slope so splash and rain run away from the house without carrying dirt back into the pool. We fit the forms around the coping, skimmers and drains, pour early before the heat of the day, and cut control joints, planned lines that give the concrete a place to crack where you won't notice it. If the budget gets tight, I'd rather keep the base work and go plainer on the finish, because nobody sees the base on pour day, but a deck on poor ground settles and cracks no matter how nice the top looks. Price mostly comes down to the deck's size, the finish and whether old concrete comes out first, and the schedule turns on any permit plus curing, the days the concrete needs before it's hard enough to use, so the written estimate is where you'll see what's included and what isn't.
Pool decks usually connect to other work. If your back door sits above the deck, we can build concrete steps down to it in a matching finish. And if a pool house or cabana is part of the plan, our slab foundation building gives it a slab made to carry a building, poured so it lines up with the deck.
What happens when you call about a pool deck in Midland?
Here's how a pool deck goes with us, from the first call through the pour to the final look together.
Call and set a visit
Call or use the form, and I'll set a time to come out. Photos of any cracks or settling and the deck's rough size help.
Measure and write it up
I measure, ask how you use the pool and leave you a written estimate that shows what's included and what isn't.
Permit, forms and the pour
Any permit comes first, and city plan review usually takes about 5 to 7 business days. Then our crew lead runs the pour with our finishers.
Walk the finished deck
After clean-up, I walk the finished deck with you and go over when it's ready to use and when it needs sealing.
Why Midland homeowners call R&C Midland Concrete Construction
The owner writes your estimate
I come out myself, look at the deck and write the estimate, so you hear straight what to expect.
Dirt work first, concrete since 2017
Before we started in 2017, I did dirt work in Midland for years, so the ground under your deck gets real attention.
Licensed and fully insured
We're licensed and fully insured, which is the first thing to ask any crew that's going to work in your backyard.
Backed by our satisfaction guarantee
Our work is backed by our satisfaction guarantee. Call (432) 219-6562 and I'll come look at your deck.
Get a written estimate for your pool deck
Tell us the deck's rough size and whether it's new or a resurface, and we'll get back to you within one business day. Then I come out for a free on-site estimate, written out, with no pressure and no obligation.
Pool deck finishes to look at
Look through these examples of concrete pool decks and finishes to get a feel for the textures and colors you might want around your pool.
Common pool deck questions
Here are straight answers to what Midland homeowners usually ask about pool decks. If your deck isn't covered here, call and ask about your own job.
How much does a concrete pool deck cost in Midland, TX?
Installing a new concrete pool deck across the US usually costs about $10.10 to $12.40 per square foot. That's a national figure, not our price, and your own number comes from measuring your deck and picking a finish on the estimate visit.
What is the best finish for a pool deck with wet, bare feet?
The best finish is one with enough texture to grip wet feet and a color light enough to stay comfortable in the sun. Broom, textured, exposed aggregate, overlays, coatings and decorative finishes all differ on both counts, and very dark finishes can get uncomfortable to stand on. A broom finish, brushed lines across the surface, is the plain choice when grip matters most.
Can my old pool deck be resurfaced instead of replaced?
Often, yes, if the old concrete is a good candidate, and resurfacing is a cost-effective way to refresh a deck and cover its flaws. If any part is still moving or settling, that has to be fixed first, because an overlay laid over a shifting slab cracks right along with it.
How often does a concrete pool deck need to be resealed?
One sealer maker's guide says most film-forming acrylic sealers, the kind that leave a coat on top, need a fresh coat every 18 to 24 months, while penetrating sealers that soak in can last three to five years. Salt-water splash and heavy foot traffic wear them faster, so when water stops beading up on the surface, it's time to reseal.
How long after sealing can you use a pool deck?
That same maker's guide allows light foot traffic after 24 hours. It says to wait the full 72 hours before running the pool heater, adding chemicals or dragging furniture across the deck.
Do I need a licensed contractor for a pool deck in Midland?
The City of Midland says most construction projects need a contractor who's licensed, bonded and registered with the city. The city's Code Administration registers contractors and verifies licensing, so you can check anyone you're thinking of hiring before you sign.
Cities where we build pool decks
Midland's permit list doesn't name pool decks, so I check with the city before we schedule and apply for you if one's needed. Pick your city below or call.
Talk to us about your pool deck
We're open seven days a week, from early morning to 11 PM, so call (432) 219-6562 whenever it suits you.